Setting Sms Centres - Siemens Gigaset C300 User Manual

Sending SMS (text messages)
Reading or deleting SMS messages
¤ Open the incoming list, then:
q
Select SMS.
¤ Read SMS
§Menu§
Select and press
SMS. Scroll through the SMS
using q.
After you have read a new SMS,
its status changes to "old".
Or delete the SMS with
¤ Delete Entry ¤
§Menu§
Changing the character set
¤ Reading an SMS
§Menu§
Press the display key.
Character Set
Text is shown in the selected character
set.
Deleting the incoming list
¤ Open the incoming list.
§Menu§
Open menu.
Delete List Select, press
§OK§
with
messages in the list are deleted.
Replying to or forwarding SMS
messages
¤ Reading an SMS
§Menu§
Press the display key.
You have the following options:
Reply
Write and send a new SMS to the sender
(¢ page 32).
Use text
Edit the text in the SMS and return it to
the sender (¢ page 32).
Send Text
Forward the SMS to another number
(¢ page 32).
34
§OK§
to read the
§OK§
.
§OK§
and confirm
. All new and old SMS
Copying the number to the
directory
Copying the sender's number
¤ Open the incoming list and select the
SMS (¢ page 33).
¤ Copy to Directory
§Menu§
¤ Complete the entry (¢ page 30).

Setting SMS centres

SMS messages are exchanged between SMS
service centres operated by service provid-
ers. You must enter the SMS service centre
through which you wish to send and receive
SMS messages into your phone. You can
receive SMS messages from every SMS serv-
ice centre that is entered, provided you have
registered with your service provider.
Your SMS messages are sent via the SMS
service centre that is entered as the active
send service centre. However, you can acti-
vate any other SMS centre as the active send
service centre to send a current message
(¢ page 34).
If no SMS service centre is entered, the
SMS menu only consists of the entry Service
Centres. Enter an SMS service centre
(¢ page 34).
Entering/changing SMS service
centres
¤ Find out about the services and special
functions offered by your service pro-
vider before you make a new applica-
tion and/or before you delete pre-config-
ured numbers.
¤ ¤ Service Centres
§Menu§
SMS
s
Select SMS service centre (e.g.,
SMS centre # 1) and press
§OK§
.