Setting The Date And Time - Siemens Gigaset C300 User Manual

Setting the date and time

Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
Please note
Depending on your network provider, the date and time may be displayed
automatically.
Redial
Enter Date:
[04.04.2010]
x
Back
Enter Time:
[07.15]
x
Back
INT 1
Time
To change the input position,
e.g., to correct an entry, press
right or left on the control key.
OK
OK
¤ Press the key below
screen to open the input field.
(If you have already set the time and
date, open the input field via the menu
¢ page 24.)
The Date/Time submenu is shown on the
display.
¤ The active input position flashes.
Enter the day, month and year as an
8-digit number via the keypad,
e.g., Q4Q42Q Q
for 4 April 2010.
¤ Press the key below
screen to save your entry.
¤ Enter the hours and minutes in
4-digit format via the keypad,
e.g., QM 5 for 07:15 am.
Change the input position with
the control key if necessary.
¤ Confirm with
§OK§
.
Taking the first steps
§Time§
on the display
§OK§
on the display
15