Listening In To An External Call (Conference); Changing The Name Of A Handset - Siemens Gigaset C300 User Manual

The external participant hears
music on hold, if activated
(¢ page 45).
s
Select a handset or Call All and
§OK§
press
When the internal participant answers:
¤ If necessary, announce the external call.
Either
a
Press the end call key. The exter-
nal call is transferred to the
other handset.
Or
§Back§
Press the display key. You are
reconnected with the external
participant.
When transferring a call, you can also press
the end call key a before the internal partic-
ipant answers.
Then, if the internal participant does not
answer or the line is busy, the call will auto-
matically return to you.
Accepting a waiting call
If you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). With Calling Line Identifi-
cation, the caller's number will appear in the
display.
a
Press the end call key to end the
internal call.
c
Press the talk key to accept the
external call.
Listening in to an external call
(conference)
Prerequisite: The Listening in function must
be activated.
You are conducting an external call. An inter-
nal participant can listen in on this call and
take part in the conversation. All the partici-
pants are made aware of additional listeners
by a signal tone.
.
Using multiple handsets
Activating/deactivating listening
in
¤ Settings ¤ Telephony
§Menu§
¤ Listening in
§OK§
Press to activate/deactivate the function
³
( = on).
Internal listening in
The line is engaged with an external call.
Your screen will display information to that
effect. To listen in to the external call.
c
Press and hold the talk key.
You can listen in to the call. All participants
hear a signal tone. During this time, this
handset displays the Add 2nd message and
it is not possible to dial another number
from this handset.
Ending listening in
a
Press the end call key.
All participants hear a signal tone.
If the first internal participant presses the
end call key a, the handset that has "lis-
tened in" remains connected to the external
participant.
Changing the name of a
handset
The names "INT 1", "INT 2" etc. are assigned
automatically upon registration. You can
change these names. The name must be no
more than 10 characters. The changed name
is displayed in every handset's list.
u
Open the list of handsets. Your
own handset is indicated by <.
s
Select handset.
§Menu§
Open menu.
Rename
~
Enter name.
§OK§
Press the display key.
41