Sharp UX-BS60 Operation Manual page 81

2
Enter the number of the receiving machine by pressing the number
keys.
•
If a pause is required between any of the digits to access a special service
or an outside line, press
pauses can be entered in a row.
•
If you are on a Flash-type PBX and are dialing out, press
to insert a pause, and then enter the number of the receiving machine.
•
If you are on a PBX and must dial a number to dial out, enter the number,
press to insert a pause, and then enter the number of the receiving
machine.
3
Check the display. If the number of the receiving machine shown is
correct, press
•
If the number is not correct, press
a time, and then re-enter the correct digit(s).
. The pause will appear as a hyphen. Several
START/
MEMORY
.
Sending a Fax by Automatic Dialling
to backspace and clear one digit at
, press
R
79