Setting The Reception Mode - Sharp UX-BS60 Operation Manual

Setting the Reception Mode

The machine has four modes for receiving incoming faxes.
Note: SMS messages can be received in any of the reception modes.
FAX mode:
Select this mode when you only want to receive faxes on your line. The fax
machine will automatically answer all calls and receive incoming faxes.
TEL mode:
This mode is the most convenient for receiving phone calls. Faxes can also be
received; however, all calls must first be answered by picking up the fax's
handset or an extension phone connected to the same line.
TEL/FAX mode:
This mode is convenient for receiving both faxes and voice calls. When a call
comes in, the fax will detect whether it is a voice call (including manually
dialled faxes), or an automatically dialled fax. If it is a voice call, the fax will
make a special ringing sound to alert you to answer. If it is an automatically
dialled fax, reception will begin automatically.
A.M. ( ) mode:
Select this mode when you go out and want the built-in answering machine to
answer all calls. Voice messages will be recorded, and fax messages will be
received automatically. (Note: A.M. mode cannot be selected unless an
outgoing message has been recorded as explained on page 48.)
Setting the reception mode
Make sure a document is not loaded in the document feeder , and then
RESOLUTION/
RECEPTION
press
REC/MEMO
PLAY/HOLD
For more information on receiving faxes in FAX, TEL and TEL/FAX modes,
see Chapter 5. For more information on using A.M. mode, see Chapter 3.
until the desired mode appears in the display.
RESOLUTION/
RECEPTION
RESOLUTION/
RECEPTION
Z
INK
R
REPEAT SKIP DELETE DIGITAL
SPEAKERPHONE
Setting the Reception Mode
RESOLUTION/
RECEPTION
A
02-JAN 10:30
FAX
02-JAN 10:30
TEL FAX
02-JAN 10:30
02-JAN 10:30
TEL
29