Sharp AL-2021 Operation Manual page 13

2
Set the paper guides to the paper width. Insert the paper (print
face down) all the way into the multi-bypass tray.
• Paper must be fed narrow side into the feed slot.
• Special papers such as transparency film, labels, and envelopes
must be fed one sheet at a time through the multi-bypass tray.
• When copying onto transparency film, remove each copy
promptly. Do not let copies stack up.
3
Press the tray select (
Note for loading envelopes
• Envelopes must be fed narrow side into the feed slot at a time.
• Do not use non-standard envelopes, and envelopes that have metal clasps, plastic
snappers, string closures, windows, linings, self-adhesive, patches or synthetic
materials. Do not use envelopes that are filled with air or envelopes that have
labels or stamps attached.
• Envelopes of which the surface is not flat because of embossing may cause the
copies/prints to become smudged.
• Under high humidity and temperature conditions the glue flaps on some envelopes
may become sticky and be sealed when copied/printed.
• Use only envelopes which are flat and crisply folded. Curled or poorly formed
envelopes may be poorly printed or may cause misfeeds.
• Be sure to select either Com10, DL, C5 or Monarch on the paper size setting of the
printer driver. (For detailed information on printer driver, refer to "PRINTER
DRIVER FEATURES" (p.51).)
• It is recommended that you perform a test print before performing the actual copy/
print job.
Note for loading thick paper
Confirm that user program 29 is set to "2 (High)" when using thick paper. (See
page 66 and 67.)
) key to select the multi-bypass tray.
13
Print face
2