User Programs - Sharp AL-2021 Operation Manual

USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or
cancelled as desired.
Setting the user programs
1
Press and hold down the light (
seconds until all the alarm indicators (
" " appears in the display.
2
Use the left copy quantity (
number (For the user program numbers, see the following table.).
The selected number will blink in the left side of the display.
3
Press the start (
steadily lit and the currently selected parameter number for the
program will blink on the right side of the display.
4
Select the desired parameter using the right copy quantity (
The entered parameter number will blink on the right of the display.
Program
No.
1 Auto clear time
2 Preheat mode
Auto power shut- off
3
mode
Auto power shut- off
4
timer
SPF automatic
6 original discharge
time (AL-2041)
Resolution of AUTO
10
& MANUAL mode
13 Memory for printer
21 Reset factory
Sort auto select
22
(AL-2041)
Prevention of OC
copies when the
24
original cover/SPF
is up function
) key to select a user program
) key. The entered program number will be
Mode
1
4
*1
4
7
*1
*1
4
1
3
5
*1
1
4
1
*1
*1
66
) key for more than 5
, ,
Parameters
10 sec., 2 30 sec., *3
90 sec., 5 120 sec., 6
30 sec., 2 60 sec., 3
30 min., 5 60 min., 6
240 min.
ON, 2 OFF
5 min., 2 30 min., 3
120 min., 5 240 min.
5 min., *2 30 min.,
60 min., 4 120 min.,
240 min., 6 OFF
300dpi, 2 600dpi
30%, 2 40%, *3
60%, 5 70%
YES, *2 NO
ON, 2 OFF
ON, 2 OFF
) blink and
) key.
60 sec.,
OFF
5 min.,
120 min.,
60 min.,
50%,
7