Sharp AL-2021 Operation Manual page 18

Installing the Utility Software
11
Click the "Button Manager" or the
"Sharpdesk" button.
Click the "Display Readme" button to
show information on packages that are
selected.
Follow the on-screen instructions.
* In Windows 2000, The "Sharpdesk"
button does not appear.
12
When installing is finished, click the "Close" button.
• If you are using Windows Vista/7 and a security warning window
appears, be sure to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a warning message appears
regarding the Windows logo test or digital signature, be sure to click
"Continue Anyway" or "Yes".
A message will appear instructing you to connect the machine to your
computer. Click the "OK" button.
After the installation, a message prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.
13
Connect the machine to your computer with a USB cable.
Make sure that the machine is powered on.
1
2 Connect the cable to the USB
connector (B type) on the machine.
The USB interface on the machine
complies with the USB 2.0 (Hi-Speed)
standard. Please purchase a shielded
USB cable.
3 Connect the other end of the cable to
the USB connector (A type) on your
computer.
The machine is found and a Plug and Play window appears.
If your computer is not compatible with USB 2.0 (Hi-Speed), the "USB
2.0 mode switching" setting in the machine's user program must be set
to "Full-Speed". For more information, see
"USER PROGRAMS" (p.66)
18
3
.