Problem
Is the paper too heavy?
The fusing temperature is
not appropriate.
Images rub off
the copy easily.
Paper damp?
Printing is not
The fusing temperature is
uniform
not appropriate.
between the
edges of the
paper and the
centre.
Possible cause
75
Solution
Use paper within the specified
range.
In the user programs, set "Fusing
temperature setting when the
bypass tray is used" (program 29)
to "2 (High)".
Replace with dry paper. If the unit
is not used for long time, remove
the paper from the paper tray and
store it in its wrapper in a dry
location.
In the user programs, set "Fusing
temperature setting when the
bypass tray is used" (program 29)
to "1 (Low)".
Page
9
67
–
67
9