Sharp AL-2021 Operation Manual page 86

C: Misfeed in the transport area
1
Lower the fusing unit release lever.
See "B: Misfeed in the fusing area" (p.85).
2
Open the front cover.
To open the front cover, see "INSTALLING THE TD CARTRIDGE" in the
Start Guide.
3
Rotate the roller rotating
knob in the direction of the
arrow and gently remove
the misfed paper from the
exit area.
4
Raise the fusing unit release lever, close the front cover and
then close the side cover by pressing the round projections
near the side cover open button. The misfeed (
go out and the start (
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
) indicator will light up.
86
Roller rotating knob
) indicator will
9