Brightness Control (Optional); Source Select / Display Off (Optional) - Medion F2 Revision 22 Operating Instructions Manual

Image

5.6. Brightness control (optional)

 You can use the two brightness controls to set the display brightness.
5.7. Source Select / Display off (optional)
 Press the Source Select button to display the OSD:
 Press the two brightness controls to select the desired input source.
 Confirm your selection by pressing the Source Select button.
NOTICE!
When you switch off the monitor by pressing the
Source Select / Display off button, the All-In-One PC
remains switched on!
* only active for HDMI (The volume can be changed by pressing the two brightness controls)
14 of 48
Command
Swipe from the top
edge down
Swipe your finger in
all directions
Tap and hold
Tap / double-tap
Display off
Volume
 Swipe from the top edge of the
screen down when an application
is running to display the
application menu.
 In tablet mode, you can move the
screen up, down, to the left and to
the right using one finger.
 In desktop mode, you select
(highlight) the chosen area of the
screen using one finger.
 To drag, tap and hold an app
title and drag the app to the new
position.
 To close, tap and hold the top edge
of a running app and drag the app
to the bottom edge of the screen.
 Tap your chosen app to start.
 In desktop mode, double-tap on an
application to start.
HDMI
PC
*