Misfeed Removal; Misfeed In The Spf - Sharp AR-5516S Operation Manual

MISFEED REMOVAL

When a misfeed occurs, the misfeed indicator (
will automatically stop.
Check the blinking misfeed location indicator to identify the location of the misfeed and remove it.
The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from the
Note
machine, taking care not to touch the photoconductive drum (the green part). Any scratches or damage to the
surface of the drum will cause dirty copies.

MISFEED IN THE SPF

1
Remove the misfed original.
Section A
Open the feeding roller cover and remove the
misfed original from the document feeder tray.
Close the feeding roller cover.
Feeding roller cover
50
) and a misfeed location indicator (
Check sections A, B, and
C in the left shows the
illustration (see the next
page), and remove the
misfed original.
(p.50)
(p.51)
(p.55)
(p.56)
Section B
Open the SPF and rotate the two release rollers
in the direction of the arrow to feed the original
out. Close the SPF and then remove the
original.
If a small original (A5 etc.) is misfed, or if an
original misfeed occurs in the reversing tray of
the SPF (if installed), open the right side cover
and remove the original. Close the right side
cover.
Right side cover
) will blink and the machine
Roller