Loading Paper - Sharp AR-5516S Operation Manual

BEFORE USING THE MACHINE

LOADING PAPER

Make sure that the machine is not copying or printing, and then follow these steps to load paper.
Loading the paper tray
1
Gently lift and pull out the paper tray
until it stops.
2
Push the pressure plate down until it
locks in place.
3
Load paper into the tray.
• Do not load paper higher than the line on
Note
the tray (up to 250 sheets).
• Do not add paper to the loaded paper. It
may cause multiple feed of paper.
• A5 can be used in the upper paper tray but
cannot be used in other trays (including
trays in optional paper feeding unit).
10
Push the centre of the
pressure plate down until
it locks into place.
• Open the package of
the paper and load it
without fanning the
paper.
• Make sure the stack of
paper is straight before
loading it.
Make sure that the paper
fits under the tabs on the
right side of the tray.
4
Gently push the paper tray into the
machine.
• If you loaded a different size of paper than
Note
was loaded previously in the tray, go to
"CHANGING A TRAY'S PAPER SIZE
SETTING"
• When misfeed occurs, rotate the paper 180
degrees and reload it.
• Straighten curled paper before using it.
(p.12).