Selecting Auditing Mode Settings - Sharp AR-5516S Operation Manual

USER SETTINGS

SELECTING AUDITING MODE SETTINGS

1
Hold down the [Light] key (
the alarm indicators ( ,
) blink.
2
Enter the program number with the
numeric keys.
If you enter the wrong number, press the
Note
[CLEAR] key (
number.
3
Press the [START] key (
4
Enter the desired setting code for the
program as explained in the detailed
procedures on the following pages.
For the setting codes, see
SETTINGS" (p.39).
• If you enter the wrong number, press the
Note
[CLEAR] key (
• If "E" (error code) blinks in the first digit of
the display, press the [CLEAR] key (
and return to step 2.
40
) until
, , ,
The display shows "- -"
with the left hyphen
blinking.
• See "AUDITING MODE
SETTINGS" (p.39) for
the program numbers.
• The selected program
number blinks.
• For example, to select
"Auditing mode", enter
"10".
) and then enter the correct
).
• The selected program
number stops blinking
and lights steadily.
• The currently selected
setting code blinks on
the right side of the
display.
"AUDITING MODE
) and return to step 2.
)
5
Press the [Light] key (
the settings.
The alarm indicators ( ,
off and the display returns to the number of
copies display.
) to complete
, , , ) go