Opening The Printer Driver From The "Start" Button - Sharp AR-5516S Operation Manual

If the tray runs out of paper during printing
Add paper to the tray or press the [PAPER SELECT] key (
LINE] key ( ) to resume printing.
Note that if the "Auto tray switching" setting in the system settings is enabled on a model that has two or more paper
trays and there is the same size of paper in another tray, the machine will automatically switch to the other tray and
continue printing.
Pausing a print job
To pause a print job during printing, press the [ON LINE] key (
off-line. Printing will be paused and the ON LINE indicator will blink.
• To cancel a print job, press the [CLEAR] key (
• To resume printing, press the [ON LINE] key (
When "Paper Source" is set to "Auto Select"
If "Paper Source" is set to "Auto Select" in the "Paper" tab of the printer driver setup screen and the correct size of
paper for a print job is not loaded in the machine, the printing procedure will vary depending on the "Use Close
Paper Size" setting in the system settings (p.37).
When "Use close paper size" is disabled
The PAPER SIZE indicator on the operation panel will blink. You can press the [PAPER
SELECT] key ( ) to select a tray manually, or load paper in the bypass tray and press
the [ON LINE] key (
When "Use close paper size" is enabled
Printing will take place using a size of paper that is close to the size of the print image.
• For limitations on copying in print mode, and print mode limitations in copy mode, see
Note
AND PRINTER MODES"
• The print image is automatically rotated to fit the paper in the event that the paper is loaded in an orientation
different from the print image.
OPENING THE PRINTER DRIVER FROM THE "Start"
BUTTON
You can open the printer driver and change the printer driver settings from the Windows "Start" button. Settings
adjusted in this way will be the initial settings when you print from an application. (If you change the settings from the
printer driver setup screen at the time of printing, the settings will revert to the initial settings when you quit the
application.)
1
Click the "Start" button and select
"Control Panel" and then select
"Printer".
• In Windows XP, click the "start" button, and
then click "Printers and Faxes".
• In Windows 2000, click the "Start" button and
point to "Settings", and then select "Printers".
•
In Windows XP, if "Printers and Faxes" does
Note
not appear in the "start" menu, select "Control
Panel", select "Printers and Other Hardware",
and then select "Printers and Faxes".
) or the [CLEAR ALL] key (
) to begin printing.
(p.14).
) to select a different tray, and then press the [ON
) on the operation panel to switch the machine
) to switch the machine online.
2
Click the "SHARP AR-XXXX" printer
driver icon.
3
Select "Properties" from the
"Organize" menu.
In Windows XP/2000, select "Properties" from the
"File" menu.
4
Click the "Printing Preferences"
button in the "General" tab.
The printer driver setup screen will appear.
"PRINTER DRIVER SETTING SCREEN" (p.28)
PRINTER FUNCTIONS
).
"OPERATION IN COPY
3
27