Opening The Printer Driver From The "Start" Button - Sharp AR-M160 Online Manual

1 PRINT

Opening the Printer Driver From the "Start" Button

You can open the printer driver and change the printer driver settings from the Windows "start" button. Settings adjusted in this way
will be the initial settings when you print from an application. (If you change the settings from the printer driver setup screen at the
time of printing, the settings will revert to the initial settings when you quit the application.)
Windows 2000/XP
1
Click the "start" button, and then click "Control
Panel".
In Windows 2000, click the "Start" button and select "Settings".
2
Click "Printers and Other Hardware", and then
click "Printers and Faxes".
In Windows 2000, click "Printers".
3
Click the "SHARP AR-XXXX" printer driver icon
and select "Properties" from the "File" menu.
4
Click the "Printing Preferences" button in the
"General" tab.
The printer driver setup screen will appear.
☞
Printer Driver Settings
CONTENTS I N D E X
Windows 95/98/Me/NT 4.0
1
Click the "Start" button, select "Settings" and
then click "Printers".
2
Click the "SHARP AR-XXXX" printer driver icon
and select "Properties" from the "File" menu.
In Windows NT 4.0, select "Document Defaults" to open
Note
the printer driver setup screen.
3
In Windows 95/98/Me, click the "Setup" tab.
The printer driver setup screen will appear.
☞
Printer Driver Settings
7