Delta MD 11871 Manual page 37

Buttonholes with decorative stitching
1. Raise the foot plate of buttonholes sewing hang the laid in threads on the
positioning cam (1) at the back of presser foot,
2. Draw forward the end of additional thread under the presser foot and place it
under the centre of presser foot.
3. Hold tightly the additional thread and hook the fork in front of the sewing
foot.
4. Bring the needle into the fabrics before starting sewing and lower the presser
foot.
5. Slowly step down foot controller buttonholes, with each face of buttonholes
encasing the laid-in threads
6. Take out fabrics and clip sewing thread.
7. Pull the laid-in threads from left side and hold it tightly.
8. The end of thread should be wound to darning needle. Draw the thread to
the back and clip.
Note: While cutting out buttonholes, pay attention to the instruction on page
Fehler! Textmarke nicht definiert..
Sewing on buttons and hooks
Sewing foot................................... button sewing foot (transparent)
Stitch type ............................................................................................. 3 - 5
Stitch length ................................................................................................0
Upper thread tension ........................................................................1 – 3
Feed dog................................................................................... discharged
Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: MD 11871
39