Delta MD 11871 Manual page 15

6. Press down again the foot pedal. Wind thread on to the bobbin until the
bobbin is full. Stop the machine. Push the shaft to the left and cut the thread.
7. Push the hand wheel to the left to close contact. (original position).
The needle will now move when you press the foot pedal.
Threading the bobbin case
1
1. Load bobbin in bobbin case. Make sure that you pull out the thread in the
direction indicated by the arrowhead (clockwise).
2. Pull thread into the slit of bobbin case.
3. Then pull thread through the bobbin tension-regulator spring to the outlet
hole.
Note: Make sure, that you pull around 10 cm of thread out of the bobbin.
Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: MD 11871
2 3
17