Delta MD 11871 Manual page 20

Tension of upper thread in case of zigzag stitching
In order to achieve good effect of zigzagging, the tension
of upper thread should be less than that of straight
stitching.
The upper thread should be visible from the reverse.
Selecting Double Needle
Turn double needle (twin needle) switch to
double stitches.
Turn double needle (twin needle) switch to
single stitches, otherwise the stitches would be narrower.
Select the stitch type
On this sewing machine, you can select a number of different stitch types.
1. Turn the hand wheel towards you until the needle is pulling out from fabric.
2. Select the desired stitch type by turning the stitch type selection dial. (Please see
„Relationship between stitch types and settings" on page 24)
Width of stitches changes seamlessly from positions 3 to 5.
When sewing elastic stitches and double action stitches
regulator must set to position +
Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: MD 11871
position if you require sewing
position if you require sewing
1
- -.
1
- the stitch length
22