Start Sewing; Changing The Sewing Direction; Cutting The Thread - Delta MD 11871 Manual

Sewing

Start sewing

Test the stitching on a swatch before using a stitch type for your actual work.
1. Raise sewing foot and put cloth beside leg
wire of needle plate.
2. Turn forward the hand wheel and lower the
needle down into the fabric. Lower sewing
foot and make sure that thread passed
backward. Step down foot pedal.
3. Fabric will go along leg wire and it is carried
forward automatically by feed dog.
4. In order to make end of thread firm, please
press the reverse stitch button and do
several reverse stitches.
Removing fabric from the sewing
machine
When you finish sewing, make sure that the
needle is at its highest position. To remove the
fabric, raise the sewing foot and pull out the
fabric from the back of the machine.

Changing the sewing direction

1. Stop the machine and turn the hand wheel towards you until the needle is in
the fabric.
2. Raise the sewing foot and turn the fabric around the needle to change the
direction as desired.
3. Lower the sewing foot and continue sewing.

Cutting the thread

Cut the thread using the thread cutter behind the sewing foot or with a pair of
scissors. Leave around 15 cm of the thread hanging from the eye of the needle.
Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: MD 11871
7
29