Delta MD 11871 Manual page 14

Winding thread to the bobbin
You can use the sewing machine to wind thread on to the bobbins easily. To do
so, take the thread from the spool through the thread guide to the bobbin.
1
1. Pull out the hand wheel slightly to prevent the needle from moving while
you wind thread on to the bobbin. Pull one of the spool holders completely
out and place a cotton reel on it.
2. Draw thread from the spool through the bobbin winder-tension disc.
3. Pull thread through the hole in the bobbin and insert the bobbin into the
bobbin shaft.
4. Turn the bobbin to the right.
5. Hold the end of the thread and press down the foot pedal. Stop after several
turns. Cut the excess thread close to the bobbin.
Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: MD 11871
16