Delta MD 11871 Manual page 11

Removing the sewing foot
•
Turn the hand wheel towards you until the needle has reached its highest
position.
•
If the sewing foot is down, raise it by pushing up the sewing foot lever.
•
Push up the sewing foot release lever behind the sewing foot holder to
release the foot. The sewing foot drops out.
•
Attach the desired sewing foot so that the pin on the foot is directly under the
groove of the foot holder. Lower the sewing foot lever.
•
Now push the sewing foot release lever upwards. The sewing foot
automatically clicks into place.
Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: MD 11871
13