Delta MD 11871 Manual page 17

3. Lead the thread through the pre-tension (1).
4. Pass the thread along the right guide to the bottom and put it under the
thread tension disc.
5. Pass the thread upwards and pull up the thread tightly, which pushes up the
inner guide spring.
6. Insert the thread from the right side into the hook of thread take-up lever (3).
7. Now guide the thread along the left guide towards the needle and pass it
through the upper thread hook (4).
8. Then pass the thread further down and through the second thread hook (5).
9. Pass the thread through the eye of the needle (6) from the front to the back
and leave a thread end of around 10 cm.
Note
An upper thread tension of 3 is ideal for most applications.
Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: MD 11871
19