Setting The User Programs - Sharp AR-206 Operation Manual

For operation of these programs after
step 3, see page 39.

Setting the user programs

Press and hold the light (
1
seconds until all the alarm indicators (
and ) blink and "– –" appears in the copy quantity
display.
Enter a program number using the numeric keys.
2
G
The selected program number will blink in the copy quantity display.
G
If a mistake is made in steps 2 to 4, press the CLEAR key. The copier
will return to step 2.
G The program numbers are shown in the table below.
For example, to change the setting of the auto power shut-off timer,
press key 3.
Program name
Auto clear time
Preheat mode
Auto power shut-off timer
Stream feeding mode
Auto power shut-off setting
Border line for 2 in 1 or 4 in 1
Rotation copy
Auto paper select mode
Auto tray switching
Auditing mode
Account number entry
Account number change
Account number deletion
Number of copies per account
Resetting account
Erase width adjustment
Layout in 2 in 1 copy
Layout in 4 in 1 copy
Offset of paper output tray
Image rotation in duplex copying
Location of the margin
Press the START key.
3
G
For programs 1 to 9 and 16 to 22, the entered program number will be
steadily lit on the left side of the copy quantity display and the
currently selected parameter number for the program will blink on the
right side.
G
For programs 10 to 15 (programs for auditing accounts), the display
varies with the program number. See page 39 for setting programs 10
to 15.
USER PROGRAMS
) key for more than 5
, , ,
Program No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
22
37
,