Sharp AR-206 Operation Manual page 25

Use the PRESET RATIO selector (
5
( , ) keys to change the copy ratio in the horizontal
direction in a similar manner as for the vertical direction.
Press the copy ratio display (
6
G
The selected ratio for the horizontal direction will be entered and the
display will change to the copy quantity display.
G
To verify the copy ratios, press and hold down the copy ratio display
( ) key. The vertical and horizontal ratios will be alternately displayed.
Ensure that the desired paper tray is selected.
7
Set the number of copies.
8
Press the START key.
9
G
To change the copy ratios again, press a PRESET
RATIO selector (
key. Then, perform step 3 and the succeeding steps.
G
To cancel this function, press the XY-ZOOM key
again.
XY ZOOM
, ) keys and zoom
) key.
, ) key or a zoom ( , )
23