Operation Panel - Sharp AR-206 Operation Manual

PART NAMES AND FUNCTIONS
Operation
panel
INTERRUPT key and indicator (p. 26)
Interrupts a copy run.
Copy quantity display
Displays the specified copy quantity during the ready
condition and displays the copy countdown as copies
are made. Also see items
ZOOM indicator (p. 17)
Lights up when a zoom ratio is set.
Copy ratio display (
Press and hold down during standby to display the copy
ratio in the copy quantity display.
Zoom keys (p. 17)
Use to select any reduction or enlargement copy ratio
from 50% to 200% in 1% increments.
PAPER SIZE ENTER key (p. 12)
Use to set the paper size in a paper tray.
AUDIT CLEAR key (p. 13)
Closes an open account.
PAPER SIZE indicators
Light up to show the selected copy paper size.
Alarm indicators
: Maintenance indicator (p. 35)
: Toner cartridge replacement required indicator
(p. 28)
: Developer replacement required indicator (p. 35)
: Paper required indicator (p. 10)
: Misfeed indicator (p. 30)
POWER SAVE indicator (p. 43)
Lights up when the copier is in a power save mode.
SPF indicator (p. 58)
Lights up when originals are set in the optional SPF
tray.
Output tray full indicator (p. 65)
Indicates copies must be removed from the paper output
tray.
6
Not used for the copier features.
and .
) key (p. 17)
B/W REVERSE key and indicator (p. 24)
Press to reverse the black and white areas.
XY-ZOOM key and indicator (p. 22)
Use to change the horizontal and vertical copy ratios
independently.
SORT/GROUP key and indicators (p. 65)
Press to select the sort or group mode when an optional
electronic sorting kit and an optional SPF or RSPF are
installed.
ORIGINAL DATA indicator
Blinks when the memory becomes full of scanned
original image data. (Used when an optional electronic
sorting kit and an optional SPF or RSPF are installed)
2 IN 1 / 4 IN 1 key and indicators (p. 67)
Press to select the 2 in 1 or 4 in 1 mode. (Only available
when an optional electronic sorting kit and an optional
SPF or RSPF are installed)
AUTO/MANUAL/PHOTO key and indicators
(p. 14)
Use to sequentially select the exposure modes: AUTO,
MANUAL, or PHOTO.
Light ( ) and dark (
(p. 15)
Use to adjust the MANUAL or PHOTO exposure level.
Numeric keys
Use to select the desired copy quantity or to make user
program entries.
Zero key
Use as part of numeric keys to enter copy quantity.
Press during a continuous copy run to display the
number of copies completed in the current run.
Press and hold during standby to display the total output
count.
) keys and indicators