Reduction/Enlargement/Zoom - Sharp AR-206 Operation Manual

REDUCTION/ENLARGEMENT/ZOOM

Reduction and enlargement ratios can be selected either automatically with
the AUTO IMAGE key or manually with the PRESET RATIO selector (
) keys and/or the zoom (
copy ratio selection from 50% to 200% in 1% increments.
16
, ) keys. The zoom function enables precise
Automatic
Place the original on the original table and close the
1
platen cover.
G
The ORIGINAL SIZE indicator for the detected size will light up.
Use the TRAY SELECT key to select the paper tray with
2
the desired paper size.
G
This feature will not work when copy paper of non-standard size is
used or the bypass tray is used.
Press the AUTO IMAGE key.
3
G
The copy ratio will be automatically set.
G
If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.
Set the number of copies.
4
Press the START key.
5
,
If user program No. 7 is not set and the orientation of the
original does not correspond to standard reduction/
enlargement ratios for the selected paper tray, the
ORIGINAL SIZE indicator will blink. Change the
orientation of the original.
However, if an optional electronic sorting kit is installed,
the original image may be automatically rotated.
G To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE key again.
G
When copying from an optional SPF or RSPF with
this feature, the automatic reduction/enlargement
mode will be automatically cancelled after copying is
complete.