Changing The Copy Paper Size In The Tray - Sharp AR-206 Operation Manual

Left guide
Front guide

Changing the copy paper size in the tray

Gently lift and pull out the paper tray until it stops.
1
Push the pressure plate down until it locks in place.
2
Squeeze the lock lever of the front guide and slide the
3
front guide to match the width of the paper.
Move the left guide to the appropriate slot as marked
4
on the tray.
G
When using A5 copy paper, load it into the uppermost paper tray. If
other trays (including trays in optional paper feed units) are used,
paper misfeeds may occur.
Load copy paper into the tray.
5
Place the appropriate label to indicate the selected
6
paper size into the recess on the right front side of the
paper tray.
Push the paper tray firmly back into the copier.
7
LOADING COPY PAPER
11