Memory Transmission - Sharp UX-P520 Operation Manual

Memory transmission

You can also send a fax through memory when sending to a single location.
This is convenient when sending to locations where the line is often busy, as it
saves you from waiting to pick up the original document and frees the feeder
for other operations.
To send a fax through memory, load the document, press
dial using one of the following methods:
♦
Press the number keys to enter the fax number and then press
♦
Press
♦
Press
If the memory becomes full...
If the memory becomes full while the document is being scanned, MEMORY
IS FULL and SEE MANUAL will alternately appear in the display.
♦
START/MEMORY
Press
to that point in memory. The remaining pages will be ejected from the
feeder. After transmission, the memory will be cleared and you can transmit
the remaining pages. You will also need to transmit the page which was
being scanned when the memory filled up.
♦ STOP
Press
repeatedly to select an auto-dial number and press
once to select the last number dialled and press
if you want to transmit the pages which have been stored up
if you want to cancel the entire transmission.
Sending a Fax From Memory
START/MEMORY
, and then
START/MEMORY
START/MEMORY
START/MEMORY
.
.
.
37