Loading Printing Paper - Sharp UX-P520 Operation Manual

Loading Printing Paper

Loading Printing Paper
You can load up to 50 sheets of A4-size, 60 - 80 g/m
(at room temperature; maximum stack height should not be higher than the
line on the tray).
1
Fan the paper, and then tap the edge
against a flat surface to even the stack.
Make sure the stack edges are even.
2
Pull the paper plate forward.
3
Insert the stack of paper into the tray, PRINT SIDE DOWN .
•
If paper remains in the tray, take it out and combine it into a single stack
with the new paper.
•
Be sure to load the paper so that printing takes place on the print side of
the paper. Printing on the reverse side may result in poor print quality.
The stack
should not
be higher
than this line
Note: Do not use paper that has already been printed on, or paper that is curled.
16
2
paper in the paper tray