Sharp UX-P520 Operation Manual page 76

LINE ERROR
MEMORY IS FULL/
SEE MANUAL
(alternating messages)
MEMORY PRINTING
NO DATA
OFF HOOK
ON HOOK DIAL
OUT OF PAPER
OVER HEAT
PAPER JAMMED
Transmission or reception was not successful. Press
STOP
to clear the message and then try again. If the
error persists, see Line Error on page 69.
The memory is full. This may occur during fax
reception if too much data is received before the
pages can be printed out. If faxes have been received
to memory because printing is not possible (an
additional message will indicate the problem), resolve
the problem so that printing can continue (see
Substitute Reception to Memory on page 46). If you
are attempting to transmit from memory, see If the
memory becomes full on page 37. If you are copying,
see If MEMORY IS FULL appears on page 47.
The fax is preparing to or printing out a document
from memory.
This appears if you attempt to search for an auto-dial
number when none have been stored.
This appears if you forgot to replace the handset after
using it to dial and send a fax. Replace the handset or
STOP
press to clear the message.
has been pressed and the fax machine is
SPEAKER
waiting for you to dial.
The paper tray is out of paper. Load paper as
explained on page 16.
The print head has overheated. Operation can be
continued after it cools. If overheating frequently
occurs, try changing the print contrast setting to
LIGHT (see page 17).
A paper jam has occurred. Clear the jam as explained
in the following section, Clearing Paper Jams .
Messages and Signals
75