Table of Contents
Advertisement
>
The result of lpstat may not be displayed correctly depending on
UNIX operating system specification (e.g. Solaris 2.x).
FTP printing
FTP (File Transfer Protocol) is used for transferring a file with TCP/IP. If
the print data is sent to a logical printer via FTP, it is printed.
Refer to the workstation's manual for details of the ftp command. The
following explanation uses print file test.prn with printer name AR-
C200P_lp as an example.
Logical directories
The printer's network interface includes three logical directories.
lp must be used for printing a file created using the printer driver.
sjis must be used for printing a text file of Shift JIS Kanji code.
euc must be used for the printing a text file of the EUC Kanji code
Logical directory Printer function
lp
sjis
euc
>
jis and euc function only as PostScript printers.
>
You can not send data to the root directory.
1.
Login to the network interface card.
When printing with ftp, use any values for name and password.
However, if the user name is [root], the password set under TELNET or
the utility is required. See the appropriate section for details.
Example: Logging in with host name AR-C200P (or
192.168.20.127).
# ftp AR-C200P (or ftp 192.168.20.127
Connected to AR-C200P
220 EthernetBoard xxxxxxxxxx Ver nn.nn FTP Server
Name (AR-C200P:<none>) : root
331 Password required.
For direct output
For Shift JIS Kanji converted output
For EUC Kanji converted output
UNIX 77
IP address
- Quick Links:
- Using Telnet
Hide quick links:
Advertisement
Table of Contents
