Windows 2000 - Sharp AR-C200P Network Interface Manual

If the LPR port is not available, install the Microsoft TCP/IP Printing
Service.
Insert the printer driver for Windows NT4.0.
1. Select [Start], [Settings], [Control Panel] and then double-click
the [Network] icon.
2. In the Network dialogue box, click the [Services] tab.
3. If the [Microsoft TCP/IP Printing] is not listed, click the [Add]
button.
4. In the [Select Network Service] dialogue box, select [Microsoft
TCP/IP Printing] and click [OK].
5. The Windows NT installation CD-ROM may be required. Follow
the remaining dialogue box prompts.

Windows 2000

Windows 2000 requires administrator privileges.
With Windows 2000, there are four options for printing using TCP/IP.
> LPR
> Microsoft LPR
> Port 9100
> IPP
In order to use Microsoft LPR, it must first be installed on your system.
LPR
Please follow the procedure described in the Windows 95/98/Me
section on page 11.
Microsoft LPR
To install this port, the following needs to be carried out:
Microsoft Windows 13