Sharp AR-C200P Network Interface Manual page 74

# /usr/sbin/lpshut
b. Add the following line to the /etc/inetd.conf file and register
the remote spooler.
printer stream tcp nowait root /usr/sbin/rlpdameon –I
c. Restart inetd
# /etc/inetd –c
6. Register the remote printer
Example: setting up a queue called AR-C200P_lp to print to host AR-
C200P
d. Register the remote printer.
# /usr/sbin/lpadmin -pAR-C200P_lp -v /dev/null
-mrmodel \-ormAR-C200P -orplp -ocmrcmodel
-osmrsmodel -ob3
e. Activate the print queue.
# /usr/sbin/accept AR-C200P_lp
f. Enable the print queue.
# /bin/enable AR-C200P_lp
g. Enable the printer spooler.
# /usr/sbin/lpsched
To customise output, for example, to add additional commands at the
start of each print job, you can edit a copy of the /usr/spool/lp/model/
rmodel model file then add it using the lpadmin command.
Example: for printer AR-C200P_lp, with model file called AR-
C200P_model
# /usr/sbin/lpshut
#
C200P_model
# /usr/sbin/lpsched
/usr/sbin/lpadmin
UNIX 73
–pAR-C200P_lp –mAR-