Sharp AR-C200P Network Interface Manual page 67

Digital full colour printer
Hide thumbs Also See for AR-C200P:
Table of Contents

Advertisement

# arp –s 192.168.20.127 00:80:87:01:00:D2 temp
The Ethernet address (MAC address) 00:80:87:01:00:D2 in the above
example can be determined from the network card self-diagnostic
test.
Use the ping command to confirm the connection with the
3.
network interface card.
Example: for IP address 192.168.20.127
# ping 192.168.20.127
If there is no reply, there is a problem with the configuration of the IP
address (the IP address has already been set manually or dynamically),
or with the network. Reset the network interface card settings to default
and try to set a temporary IP address.
If you still have the problem after resetting the network interface card,
consult the network manager.
4.
Login to the network interface card using TELNET.
Example: Logging in to IP address 192.168.20.127
#telnet 192.168.20.127
Trying 192.168.20.127
Connected to 192.168.20.127
Escape character is '^]'.
EthernetBoard xxxxxxxxxx Ver nn.nn TELNET server
login: root
'root' user needs password to login.
password: <CR>
User 'root' logged in.
No. Message Value (level .1)
1 : Setup TCP/ IP
2 : Setup SNMP
3 : Setup NetWare
4 : Setup EtherTalk
5 : Setup NetBEUI
6 : Setup printer trap
7 : Setup SMTP (Email)
9 : Maintenance
10 : Setup printer port
11 : Display status
12 : IP Filtering Setup
97 : Network Reset
98 : Set default (Network)
UNIX 66

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents