Windows 95/98/Me; Windows Nt 4.0 - Sharp AR-C200P Network Interface Manual

Windows 95/98/Me

1. Select [Start], [Settings], and [Control Panel].
2. In the Control Panel double-click on the [Network icon].
3. In the Network dialogue box select [Configuration Panel].
4. If [Client for Microsoft Networks] is not listed, click the [Add]
button.
5. In the [Select Network Component Type] dialogue box, select
[Protocol] then the [Add] button.
6. In the [Select Network Protocol] dialogue box, select [Microsoft]
from the list of manufacturers, then select [NetBEUI] from the list
of [Network Protocols] and then click [OK].
7. The Windows installation CD-ROM may be required. Follow the
remaining dialogue box prompts.

Windows NT 4.0

1. Click the [Start] button, select [Settings] and then [Control
Panel].
2. Double-click the [Network] icon.
3. In the [Network] dialogue box, click the [Protocols] tab.
4. If the [NetBEUI Protocol] is not listed, click the [Add] button.
5. In the [Select Network Protocol] dialogue box, select [NetBEUI
Protocol] and click [OK].
Novell Netware IPX 20