Sharp AR-C200P Network Interface Manual page 37

Location
Print Server Name
Frame Type
Operation Mode
Check box besides Bindery
Setup
Bindery Setup
NDS Setup
Comments
Set Print Server name.
Set primary NetWare frame type.
Set NetWare mode.
Check if you want to use the Bindery mode and Bindery
Setup button becomes available. If it is unchecked, the
button is greyed out.
Configure items related to Bindery mode.
In this dialogue box, the following items can be configured.
Available File Server and
Selected File Server.
Password.
Job Polling Time.
Set NDS tree and context where Print Server was created.
Network Configuration 36
Select file servers to
connect. Up to eight file-
servers can be selected.
Select a server from
Available file server list and
click >> button. The server is
copied to Selected file
server box.
Set password for Print
Server.
Set print job polling interval
in seconds.