Sharp AR-C200P Network Interface Manual page 70

Example: for host name AR-C200P, to create a queue called AR-
C200P_lp
AR-C200P_lp: \
:lp=:rm=AR-C200PAR-C200P:rp=lp:\
:sd=/usr/spool/AR-C200P_lp:\
:lf=/usr/spool/AR-C200P_lp/AR-C200P_lp_errs:
AR-C200P_lp The name of the printer queue
lp:
rm:
rp:
sd:
lf:
5. Create the spool directory and error log file.
Example: for spool Directory AR-C200P_lp and Error Log file AR-
C200P_lp_errs
# mkdir /usr/spool/AR-C200P_lp
# touch /usr/spool/AR-C200P_lp/AR-C200P_lp_errs
# chown –R daemon /usr/spool/AR-C200P_lp
# chgrp –R # daemon /usr/spool/AR-C200P_lp
Check that lpd (printer daemon) is activated.
6.
# ps aux | grep lpd
7. If lpd is not running, you can start it by logging in as superuser
and executing
# /usr/lib/lpd &
The name of the device used to connect to the
printer. Does not need to be specified for a remote
machine.
The name of the host of the remote printer. This
should be the same as the name added to the /etc/
hosts file.
The name of the printer on the remote printer. It
should be lp.
The spool directory. Give the absolute path.
The error log file. Give the absolute path.
UNIX 69