Bios Recovery (3-Pin Recovery1) - MAXDATA PLATINUM 50 I M1 User Manual

BIOS recovery (3-pin RECOVERY1)

This jumper allows you to recover your original BIOS from a floppy disk in case the BIOS codes and
data get corrupted.
To recover the BIOS:
1. Turn OFF your computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3.
3. Insert a floppy disk with the original or updated BIOS file.
4. Plug the power cord and turn ON the computer.
5. The system searches for the BIOS file in the floppy then reflashes the BIOS.
6. When finished, shut down your computer.
7. Replace the jumper cap from pins 2-3 to pins 1-2.
8. Reboot your computer.
9. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.
RECOVERY1
1
2
Normal
(Default)
MAXDATA PLATINUM 50 I M1 MAXDATA PLATINUM 50 I M1
2
3
BIOS recovery
Figure 18. BIOS Recovery Setting
21 21