Ip Over Atm - Comtrend Corporation CT-5624S User Manual

6.2.3

IP Over ATM

To configure IP Over ATM,
1. Select Quick Setup and click Next.
2. Enter the PVC Index and click Next.
3. Type the VPI and VCI values provided by the ISP and click Next.
4. Select the IP over ATM (IPoA) radio button and click Next. The following
screen appears.
Notice that DHCP is not supported over IPoA. The user must enter the IP
address or WAN interface for the default gateway setup, and the DNS server
addresses provided by the ISP.
5. Click Next. The following screen appears.
Enable NAT checkbox
If the LAN is configured with a private IP address, the user should select this
checkbox. The NAT submenu on the left side main panel will be displayed after
reboot. The user can then configure NAT-related features after the system
comes up. If a private IP address is not used on the LAN side (i.e the LAN side is
using a public IP), this checkbox should be de-selected. When the system comes
back after reboot, the NAT submenu will not be displayed on the left main panel.
33
- -