Registering And De-Registering Handsets - Gigaset A155 User Giude

Skipping forward and back/stopping while playing
back messages
ú
Playback lasts longer than 1 sec.:
To the start of the current message.
ú
Playback lasts no longer than 1 sec.:
To the previous message.
ù
To the next message.
û
Stop playback.
Deleting individual messages
A message can be deleted during playback by
pressing the delete key
Deleting all old messages
Press and hold the delete key
tone).
This function is not possible during playback.
Picking up a call from the answering
machine
While the answering machine is recording a mess-
age you can still answer the call by pressing and
c
holding the key. Recording stops and you can
speak to the caller.
Registering and de-registering
handsets
You can register up to four handsets to your base
station.
Manual registration of other handsets
Other handsets are registered as follows:
1. On the base station
Press and hold the register/paging key
for about 5 seconds. The registration process
starts.
2. On the handset
Start to register your handset as described in its
user guide.
De-registering handsets
You can de-register another handset from any sup-
plied and registered handset as follows:
¢ ¢
j
DE-REG HS
Enter system PIN (default: 0000)
¢ ¢
Enter number of the handset that is to
OK
be de-registered
A long signal tone sounds and the internal number
disappears from the de-registered handset. Hand-
ÿ
(short signal tone).
ÿ
(long signal
ý
(page 1)
¢
OK
6
sets that have not been de-registered retain their
internal number.
Manual registration of a handset included
in package
You only need to carry out this procedure if you
have de-registered your handset or reset the sys-
tem PIN.
1. On the base station
Press and hold the register/paging key
for about 5 seconds.
If the base is ready for registering (approx. 60
secs.), you will here a signal tone. If you have
not completed the registration within this time,
repeat the action.
2. On the handset
Within 60 seconds after pressing the register/pag-
ý
ing key on the base:
¢
j
¢
REGISTER HS
(default: 0000)
After a brief pause, the display shows the internal
numbers that are available for the handset. Key in
the required number on the keypad.
A long signal tone concludes the registration.
If internal numbers 1 to 4 have already been
assigned (four handsets have already been regis-
tered) it is not possible to register another handset.
A3 1 0 0 8 - M1 7 1 7 - L 1 0 1 - 2 - 7 6 1 9
Siemens Aktiengesellschaft,
issued by Siemens Communications
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2005
All rights reserved. Subject to availability.
Rights of modification reserved.
Siemens Aktiengesellschaft
http://www.siemens.com/gigaset
ý
¢
Enter system PIN
.
OK
12-09-2005
(page 1)