Using Several Handsets; Handset Settings; Internal Calls - Gigaset A155 User Giude

Using several handsets

Internal calls

Internal calls are free calls to other handsets that
are registered to the same base.
Press the key.
INT
The display shows
either ...
Call all handsets:
Press the talk key or
cor OK
or ...
Call a single handset:
Enter number of handset,
~
e.g.
or ...
End the call:
Press the end call key.
a
The number of the calling handset is shown in the
display of the called handset. To accept the call
c
press the talk key .
Internal conference/Call connecting/
Three-party conference
You are in conversation with an external caller.
To confer:
1 Call the internal number
2 Confer
3 Press the . You are reconnected with the
INT key
external caller.
Connecting a call:
1 Call the internal number
2 If required, announce the call
3 Press the end call key
is connected with the external caller.
You can also press the end call key
ately (without announcing the call). If the internal
number is not available the call will come back to
you automatically.
Three-party conference:
1 Call the internal number
2 If required, announce the call
3 Press and hold the star key
er is connected. The display shows
.
CONFERENCE
CALL ALL
.
OK
2
.
a
. The internal number
a
immedi-
P
. The external call-
7
Looking for a handset ("Paging")
If you have mislaid your handset you can page it
with the help of the base. To do this, briefly
(2 seconds max.) press the register/paging key
on the base. All handsets will ring at the same
time.
End paging: Press the register/paging key
.
the base briefly or any key on the handset.
Pressing the register/paging key
i
more than 2 seconds puts the base sta-
tion into registration mode. The handsets
will not ring in this case.

Handset settings

Changing the display language
You can view the display texts in different lan-
guages:
¢
j
SETTINGS
If you have inadvertently set a language
you don't understand, press the following
i
keys:
¢
j
. Then select the correct language.
OK
Setting the date/time
Set the current date and time.
¢
j
DATE/TIME
To enter numbers press the relevant key on the
keypad.
The digit that is to be changed flashes. Use four
digits to enter the date, e.g.
The display will then change automatically to allow
you to enter a time. Use four digits to enter the
QM15
time, e.g.
with .
OK
You can correct each entry by pressing the
¢ ¢
LANGUAGE
w
with 5 x scroll down
¢
OK
QOQ5
for the 9th May.
for 7:15 am. Confirm your entries
ý
ý
on
ý
for
OK
¢ ¢
OK
i
key.