MATSONIC MS7177CT User Manual page 65

RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and
you can set the date (day of the month), hour, minute and
second to turn on your system. When set to 0 (zero) for the
day of the month, the alarm will power on your system every
day at the specified time.
Primary INTR (On)
Set Primary INTR to ON to allow you to enable or disable IRQ
3 through IRQ 15 activity monitoring. Set it to OFF to disable
IRQ/Event Activity Detect
Scroll to this item and press <Enter> to view the following
screen:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
IRQ/ Activity Detect
IRQ 3 (COM2)
IRQ 4 (COM1)
IRQ 5 (LPT2)
IRQ 6 (Floppy Disk)
IRQ 8 (LPT1)
IRQ 7 (RTC Alarm)
IRQ 9 (IRQ2* Redir)
IRQ 10 (Reserved)
IRQ 11 (Reserved)
IRQ 12 (PS/2 Mouse)
IRQ 13 (Coprocessor)
IRQ 14 (Hard Disk)
IRQ 15 (Reserved)
: Move Enter : Select
F5:Previous Values
This screen enables you to set IRQs that will reestablish the
system from a power saving sleep state.
Set any IRQ to Enabled to allow activity at the IRQ to wake up
the system from a power saving mode.
Press <Esc> to return to the previous screen.
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Enabled
Disabled
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
59
Item Help
Menu Level
F1:General Help