Fault Diagnosis And Troubleshooting - MAXDATA Multimedia Notebook Computer User Manual

FAULT DIAGNOSIS AND TROUBLESHOOTING

If a problem occurs while working with your computer, first of all try
using the following information to solve the problem. If the problem
cannot be solved in this way, you can find additional information in the
advanced service handbook (on the device drivers and utilities CD-
ROM). If the problem persists, switch off the system for several
minutes and then restart it. You will lose all unsaved data, but the
system may work properly again. Subsequently contact your dealer or
customer support agent.
Although I'm pressing the power switch the computer stays
switched off.
Possible cause of the problem: The battery is missing or is incorrectly
installed.
Note: The power on LED is not lit.
Troubleshooting:
o Make sure that the battery is in the battery compartment and
installed properly.
o Check that the battery terminals are making direct contact.
o Connect your notebook to the power adapter so that the battery
(if present) can recharge.
Possible cause of the problem: Battery level low.
Note: The battery display LED flashes.
Troubleshooting:
Operate the computer using the power adapter. If the system does not
immediately start up, switch off the computer and then restart it.
Appendix B - Troubleshooting
83