Installation Instructions; Restoring The Drivers; Utility Cd - MAXDATA Multimedia Notebook Computer User Manual

Software

INSTALLATION INSTRUCTIONS

RESTORING THE DRIVERS

Your system is supplied in a preloaded condition. This means that all the
data and drivers that the system requires are already on the hard disk.
In case you erase and/or format your hard disk drive, the system
drivers are stored on the Utility CD supplied with the computer.
After reinstalling the operating system (for example, with the Recovery
CD), this allows you to restore your notebook to a usable condition.
THE UTILITY CD
The Utility CD will run automatically after you place it in the drive. If this
is not the case, you can run the CD as follows: select <My Computer">
<CD Drive> and then the "utility.exe" file.
You can select the driver that you want to install in the "Drivers"
-section. Recommended: All of the dri-vers listed from top to bottom.
In addition, you can later install the advanced functions you require in
the "Utility" section.
When using the Utility CD, please follow the menu instructions.
77