Switching The Computer On - MAXDATA Multimedia Notebook Computer User Manual

Preparation

SWITCHING THE COMPUTER ON

Fig. 5
Note:
Please note that with the Windows
operating systems you should always
switch off the computer as follows:
Click the Start button
Select Shut Down
Click OK
This avoids any problems with the
hard disk and operating system.
The operating system is installed the first time you switch on the
computer. Please follow the operating system's installation instructions
here.
After installation and restarting, the computer is ready to use.
The basic graphics functions allow you to modify the resolution, color
depth, and desktop appearance.
You can find more detailed information on this point in the installation
instructions.
64
You've completed the preparation.
Now operate the on/off button to
switch the notebook on.
Once the computer is switched on, the
on/off switch can perform several
functions depending on the energy
settings.
In the standard settings, pressing it
again will switch off the computer.
Tip:
If you experience a program or system catch,
press the buttons: Ctrl + Alt + Del. If you're
fortunate this will enable you to end only the
task that has crashed and/or restart the
computer.
(Warm start). If this does not work, hold down
the on/off button for more than four seconds –
this will switch off the computer. You can now
start up the computer as normal (cold start).