Table of Contents
Advertisement
Item
Electrical
Requirements
Charger Clamp
Dimensions
Battery Capacity
Charger Dimensions
Stand Dimensions
Unit Weight
NOTE: No replacement parts are available for this product.
When unpacking, check to make sure all the parts listed and shown on the Product Features
Listing on pages 9 through 11 are included. If any parts are missing or broken, please
call Harbor Freight Tools at the number shown on the cover of this manual as soon as
possible.
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
Failure to follow all instructions listed in the following
pages may result in electric shock, fire, and/or serious injury.
SKU 92775
PRODUCT SPECIFICATIONS
Input Power: 120 VAC / 60 Hz.
Power Plug Type: 3 Prong, Polarized.
Polarity: Reverse Polarity w/Short Circuit & Overload Protection.
Output Power: Can Charge 12 VDC Batteries @ 0.25, 0.50, and 0.90 AMPs.
2-1/2" Wide x 3-1/4" Long x 5/8" Thick w/17" Cord.
Can Charge Up To 6 Batteries At One Time.
11-3/8" Long x 15-1/2" Wide x 8-1/2" High.
18-1/4" Long x 18-1/8" Wide x 37-1/4" High.
44 Pounds.
UNPACKING
SAVE THIS MANUAL
GENERAL SAFETY RULES
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
For technical questions, please call 1-800-444-3353
Description
WARNING!
PAGE 2
Advertisement
Table of Contents
