Product Specifications; Operating Instructions - Chicago Electric 65042 Set Up And Operating Instructions Manual

GROUNdING
ANd dEATH FROM
INCORRECT GROUNdING
WIRE CONNECTION:
Check with a qualified
electrician if you are in doubt
as to whether the outlet is
properly grounded. do not
modify the Power Cord Plug
provided with the Battery
Charger. do not use the
Battery Charger if the Power
Cord or Plug is damaged. If
damaged, have it repaired by
a service facility before use. If
the Plug will not fit the outlet,
have a proper outlet installed
by a qualified electrician.
SYMBOlOGY
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
No Load Revolutions per Minute
n 0 xxxx/min.
(RPM)
SKU 65042
TO PREVENT
ElECTRIC SHOCK
For technical questions, please call 1-800-444-3353.

PROdUCT SPECIFICATIONS

Designed to charge most 6 volt DC and 12 volt
Product DC vehicle batteries. Also designed to charge
Applications mobile units such as PSP's, iPODS, MP3's,
and cell phones.
120 VAC / 60 Hz (Household Current)
Power Input
12 VDC (Cigarette Lighter Receptacle)
Power 6/12 VDC (Fast: 6 ADC / Slow: 2 ADC)
Output (USB Terminal: 5V/0.5A)
Power Cord
2-Prong, Polarized
Plug Type
Battery
Maximum 120 Ah
Capacity
Automatic 3-Step Charging:
(Constant Current, Constant Voltage, Floating).
Features Overload & Polarity Reversal Protection.
5 LED Indicators for:
(Slow Charge, Fast Charge, 6V, 12V, USB).
12 VDC Plug (Qty. 1)
Accessories Battery Cable Clamps (Qty. 2)
Plug Adapters (Qty. 8)
Fuse F3A250V
UNPACKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.

OPERATING INSTRUCTIONS

Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
SERIOUS INJURY FROM ACCIdENTAl
OPERATION:
Unplug the Battery Charger from its
power source before performing any
inspection, maintenance, or cleaning
procedures.
TO PREVENT
Page 6