Specifications; Safety Warnings And Precautions - Chicago Electric 93258 Assembly And Operating Instructions Manual

Construction: Molded PolyPlastic Body
Power
120 VAC, 60 Hz
Requirements:
Battery Cables 24" L x 18 AWG
Self-resetting circuit breaker
Safety Features:
Reverse polarity protected
Thermal overload protected
Dimensions: 6-
You will need the manual for the safety warnings and precautions, assembly instructions, operating
and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice
number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future
reference.
WARNING: When using tool, basic safety precautions should always be followed to reduce the
risk of personal injury and damage to equipment.
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2. Do not operate battery charger in explosive atmospheres, such as in the presence of flammable
liquids or dust. Batteries and battery chargers may create sparks which may ignite the dust or fumes.
Caution must be exercised when charging, hydrogen, an explosive gas, is released when charging
lead-acid batteries. Always allow proper ventilation to the charger and battery and keep the hood open
during use.
3. Keep bystanders, children, and visitors away while operating a battery charger. Distractions can
cause you to lose control. Protect others in the work area from debris such as corrosion materials and
sparks. Provide barriers or shields as needed.
Grounded battery chargers must be plugged into an outlet properly installed and grounded in
4.
accordance with all codes and ordinances. Never remove the grounding prong or modify the
plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in
doubt whether the outlet is properly grounded. If the battery charger should electrically malfunction
or break down, grounding provides a low resistance path to carry electricity away from the user.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
5.
There is an increased risk of electric shock if your body is grounded.
6. Do not expose battery charger to rain or wet conditions. Water entering a battery charger will
increase the risk of electric shock.
7. Do not abuse the Battery Cables. Never use the Battery Cables to carry the tool. Keep the Bat-
tery Cables away from heat, oil, sharp edges, or moving parts. Replace damaged Battery Cables
immediately. Damaged Battery Cables increase the risk of electric shock.
SKU 93258

Specifications

/ "L x 3- / "W x 1- / "H
5 9 9
8 16 16
Save This Manual

Safety Warnings and Precautions

Read all instructions before using this tool!
For technical questions, please call 1-800-444-3353.
Output: 12 VDC at 1.5 AMPS
Required Power 3-prong grounded power cord,
Input Cord: see chart on page 6
Automatically changes to "float"
Charge
charge when battery is fully
Controller:
charged.
LED charged indicator lights.
Net Weight: 2.0 Lbs.
Page 2