Power Management - MAXDATA Multimedia Notebook Computer User Manual

POWER MANAGEMENT

Note on PC Cards
Never remove a PC card
while the system is in
save-to-disk mode. This
would deactivate the slot
and problems could arise
from a modified system
configuration the next
time you start up the
computer.
��TENTION
Your system is compatible with the ACPI power
saving system.
The basic power management settings can be
found under the following in Windows operating
systems: <Settings> <Power Options>. If you
have questions, use the Windows Help func-
tion.
Here you can set the behavior separately for vari-
ous battery charge levels.
Standby: - low energy consumption -
The display is dimmed and the hard disk remains
unchanged. The power LED fl ashes. By pressing
the on/off button, the computer returns to the nor-
mal operating state. The user must log on again.
Sleep: - without power adapter no energy con-
sumption -
The current operating state is saved to the hard
disk; the computer is switched off. All open docu-
ments or applications become available again
when the computer is switched on.
Switching off the notebook and disconnect-
ing it from the power supply (pulling the plug
of the power adapter) can prevent any energy
consumption.
Power Management
65